Cigar guide

Cigar sizes and shapes: a size chart and what the names mean

The size chart, and what the names and shapes mean.

The quick answer

A cigar's size is written as length in inches by ring gauge, so a 5 x 50 is 5 inches long and 50/64 of an inch across. A robusto runs 4¾ to 5½ inches by a 48 to 52 ring. A toro is about 6 by 50 to 52, a corona 5½ to 6 by 42 to 44, and a Churchill 7 by 47. Makers set their own numbers, so when a name and a chart disagree, go by the size listed for the cigar in front of you.

Looking for wrappers, strength or the other ways cigars get sorted? Start with our guide to types of cigars.

In this article

How to read a cigar size

The first number is the length in inches. The second is the ring gauge, the cigar's diameter in 64ths of an inch. A 6 x 50 is 6 inches long and 50/64 of an inch across, and a 5 x 50 is the same width and an inch shorter.

You may also see the ring printed first, as 50 x 5. It's the same cigar. Our separate guide covers what ring gauge means in more detail.

Cigar size chart

Outside Cuba, nobody sets what these names measure. Sizes below are length in inches by ring gauge, the cigar's width in 64ths of an inch, so a 50 is about 0.78 inch across. The middle column is the usual figure, and the last shows the lowest and highest in the guides under Sources for that name alone. A dash means we didn't find another figure. Some of the usual figures go back to a 2000 trade guide.

For the time each one takes, see how long each size takes.

Straight-sided sizes (parejos)

Cigar size chart
NameTypical size (inches x ring gauge)Range you'll see
Petit corona
About 4 1/2 x 40 to 42
4 to 5 1/8 x 40 to 44
Corona
5 1/2 to 6 x 42 to 44
5 1/4 to 6 x 40 to 44
Corona gorda
5 5/8 x 46
5 1/2 to 6 x 46 to 48
Lonsdale
6 1/2 x 42
6 to 6 1/2 x 40 to 44
Panatela (panetela)
5 to 7 1/2 x 34 to 38
5 to 7 1/2 x 28 to 39
Lancero
7 x 38 to 42
6 1/2 to 7 9/16 x 38 to 42
Robusto
4 3/4 to 5 1/2 x 48 to 52
4 3/4 to 5 1/2 x 48 to 56
Toro
About 6 x 50 to 52
5 1/2 to 6 1/2 x 48 to 54
Churchill
7 x 47
6 1/2 to 7 7/8 x 46 to 50
Double corona
7 1/2 to 8 1/2 x 49 to 52
6 3/4 to 8 1/2 x 49 to 54
Gordo
6 to 7 x 60 or more
6 to 8 x 60 to 70

A few of these names overlap. One trade publication treats the corona gorda and the toro as one size under two names, with 5⅝ x 46 as the older Cuban figure and 6 x 50 as another common one. Others list them separately. One trade publication counts a lancero as a kind of panatela. You'll also see the double corona called a presidente. If you're choosing between a robusto and a toro, go to robusto vs. toro.

Shaped sizes (figurados)

Cigar size chart
NameTypical size (inches x ring gauge)Range you'll see
Belicoso
5 to 5 1/2 x about 50
5 to 6 1/2 x 50 to 54
Torpedo
No agreed size
-
Pyramid
6 to 7 inches, ring about 40 at the head, 52 to 54 at the foot
-
Perfecto
Lengths vary
-
Culebra
Three cigars braided, usually 5 to 6 x 38
5 to 6 1/2 x 38 to 42
Diadema
Very large, often 8 inches or more
-

What's a 5 x 50 called? Common sizes by their numbers

If you have the numbers and want the name, these are the usual matches.

What's a 5 x 50 called? Common sizes by their numbers
If it saysIt's usually called
5 x 50
Robusto
6 x 50
Toro
7 x 47
Churchill
5 1/2 x 42
Corona
4 1/2 x 42
Petit corona
6 1/2 x 42
Lonsdale
7 x 38
Lancero
6 x 60
Gordo

Length alone won't name a 5-inch cigar. With a 48 to 52 ring it's in robusto range. At about 42 it's a petit corona.

Vitola, and why the names don't fix a size

Vitola is a factory term for a cigar's shape, and robusto and corona are examples. Some guides use the word for shape alone. Others mean shape, length and ring taken together, so you'll hear it both ways.

Cuban cigars have one naming system, with factory names of its own. A petit corona is a mareva in a Cuban factory, and a double corona is a prominente. Everywhere else, the maker picks. Cigars from 5½ to 6½ inches with rings from 48 to 54 have all been called toros, and one maker's 6 x 46 was sold as a lancero.

Some makers use names of their own, as Davidoff Aniversario does. Davidoff lists the Special R as a 4⅞ x 50 robusto, the No. 3 as a 6 x 50 toro, the Special T as a 6 x 52 torpedo and the Double R as a 7½ x 50 double corona.

Parejo and figurado

Cigars fall into two families of shape. A parejo is a straight-sided cigar. A figurado is any cigar that isn't straight-sided, such as a torpedo or pyramid.

Most parejos have an open foot, the end you light, and a closed head that needs cutting. A parejo can be round or box-pressed.

Torpedo, belicoso and pyramid

All three taper to a closed head. After that, the definitions split.

Pyramid. This is the easiest to picture. It widens the whole way from the head to a cut foot.

Belicoso. Traditionally a short pyramid with a slightly rounded head. A trade guide from 2000 said many belicosos by then were coronas or corona gordas with a tapered head. A glossary from the same publisher describes it as a shorter, more rounded taper than the other two.

Torpedo. This is the one people argue over. You'll see it used as another name for a pyramid, for a closed-foot cigar with a pointed head and a bulge in the middle, and for a straight body tapering to a point with a cut foot. One retail guide says torpedo and pyramid are practically the same name now.

When a maker calls a cigar a torpedo, count on a tapered head and look at the rest of it yourself. If you're deciding how to open one, here's which cut suits a pointed head.

Perfecto, culebra and diadema

A perfecto tapers at both ends, usually with a bulge in the middle and a closed foot. Lengths vary so much that the name tells you more about the shape than the size.

A culebra is three panatelas braided together and banded. You separate them and smoke each one on its own.

A diadema is a very large figurado with a tapered head, often 8 inches or more. You may also see the name salomon. Salomones are diademas, but not every diadema is a salomon.

Does size change the flavor?

Length gives you more time with the same blend, and one cigar maker says it lets flavors develop more gradually. On a perfecto, the same maker says, the changing width shifts the mix of wrapper, binder and filler as it burns. Whether a thicker cigar smokes differently is covered in our ring gauge guide.

The blend sets strength, and our guide to cigar strength, body and flavor shows how to read it. We don't name a best size for flavor. If you're curious, try one blend in two sizes, and keep in mind the mix of tobaccos changes with the size.

Questions about cigar sizes

Why is it called a Churchill?

It's named for Sir Winston Churchill. The size is a large corona format, traditionally 7 x 47. The Romeo y Julieta Churchill is the cigar two references tie to the name.

What size are most cigars?

One retailer's guide puts most premium cigars at about 4½ to 7½ inches long with a 38 to 60 ring.

What is the most popular cigar size?

Guides most often name the robusto, and a trade guide from 2000 called it the most popular size in America. We didn't come across sales figures by size, so treat that as the trade's impression.

What size is a corona?

The trade's reference figure is 5½ to 6 inches with a 42 to 44 ring. The Cuban standard is 5⅝ x 42. The corona is also the benchmark other names are built on, such as petit corona and double corona.

Sources

25 source links