Cigar guide

Cigar ring gauge: what it means, a chart, and how to measure one

How wide each ring gauge is and how to measure a cigar at home.

The quick answer

Ring gauge is a cigar's diameter in 64ths of an inch. A 64 is one inch across, and a 50 is 50/64, or 25/32 of an inch, about 19.8 mm. It only measures width, so it won't tell you how strong a cigar is. Jump to the chart or to how to measure one.

In this article

What ring gauge means

One ring is 1/64 of an inch. A 40 is 40/64 of an inch across, a 32 is half an inch and a 64 is a full inch.

Converting one is plain arithmetic from that definition:

  • Inches: ring gauge ÷ 64
  • Millimeters: ring gauge × 25.4 ÷ 64

The number measures across the cigar, not around it, and it says nothing about length. Size names like robusto or gordo, and how a size such as 5 x 50 is written, are on our cigar size chart. Width is one of several ways to sort cigars, and our overview covers the main types of cigars.

Ring gauge chart

The fractions, decimals and millimeters are converted from the ring number, with millimeters rounded to one decimal place. The last column shows five sizes from one line we carry, the Padrón Thousands Series, length first. All five were in stock online in natural and maduro on November 8, 2026. On a narrow screen, scroll the table sideways.

Ring gauge chart
Ring gaugeInches (fraction)Inches (decimal)MillimetersPadrón size
26
13/32
0.406
10.3
28
7/16
0.438
11.1
30
15/32
0.469
11.9
32
1/2
0.500
12.7
34
17/32
0.531
13.5
36
9/16
0.563
14.3
38
19/32
0.594
15.1
40
5/8
0.625
15.9
42
21/32
0.656
16.7
44
11/16
0.688
17.5
46
23/32
0.719
18.3
48
3/4
0.750
19.1
50
25/32
0.781
19.8
5 × 50 (2000)
52
13/16
0.813
20.6
5 1/2 × 52 (3000)
54
27/32
0.844
21.4
6 1/2 × 54 (4000)
56
7/8
0.875
22.2
5 1/2 × 56 (5000)
58
29/32
0.906
23.0
60
15/16
0.938
23.8
6 1/4 × 60 (7000)
62
31/32
0.969
24.6
64
1
1.000
25.4
66
1 1/32
1.031
26.2
70
1 3/32
1.094
27.8
80
1 1/4
1.250
31.8
100
1 9/16
1.563
39.7

How to measure a cigar's ring gauge

You need a caliper, a printed ruler or a strip of paper. A caliper reads the width directly.

With a caliper

  1. Close the jaws across the body at its widest point, clear of the band.
  2. Read the width in millimeters.
  3. Multiply by 64 and divide by 25.4, then round to the nearest whole number. A reading of 19.8 mm comes to 49.9, so call it a 50.

With a printed ruler

Tobacconist University publishes a printable cigar ruler marked from 16 to 64. Print it at actual size. The sheet warns that printer results may vary, so check it against a real ruler before you trust it. Then hold the cigar against the marks and find the one that matches its width.

With a strip of paper

This one is plain circle arithmetic, useful when a ruler is all you have.

  1. Wrap a thin strip of paper once around the body, snug but not tight.
  2. Mark where the paper meets itself, then lay it flat and measure to the mark in inches. That's the circumference.
  3. Divide by 3.1416 and multiply by 64. A strip of 2.45 inches comes to 49.9, so call it a 50.

These are home measurements, so treat the result as close.

Tapered and pressed cigars. On a figurado, the listed ring gauge generally refers to the widest point, so measure there. When a size gives two numbers, such as 16/40, they're diameters at different points along the cigar, and the smaller number is the narrower part. For a box-pressed cigar, one cigar glossary says an average measurement is generally used, since the sides are no longer round.

Big-ring cigars: 60, 70 and up

A 60 is 15/16 of an inch across, just short of a full inch. A 70 is 1 3/32 inches. Padrón's 7000, at 6¼ × 60, is the 60 on the chart above.

What counts as thick has moved. When Diamond Crown was reintroduced in 1995 with every size at a 54 ring, it made headlines, and that was considered quite fat at the time. Trade guides describe 60 or more as no longer unusual, and two size guides put the top of the range at 70 or 80. A 100 ring would be 1 9/16 inches across, about 40 mm.

Before you buy anything 60 or up, check that your cutter takes it. Our guide to types of cigar cuts covers which cut suits which ring gauge.

Does a thicker cigar smoke differently?

It can. Thin cigars tend to burn hotter than thick ones, though none of the guides we read measured it.

The mix of tobacco changes too. Tobacconist University works through the geometry: doubling the ring gauge doubles the diameter and circumference and quadruples the cross-sectional area. So when the blend's proportions and other variables stay comparable, a thinner cigar can show proportionally more influence from its wrapper and binder, and a thicker one proportionally more from its filler. Narrower cigars also generally produce less smoke per puff.

One retailer guide says makers producing for the American market often adjust the filler ratio to suit the size. We take that as a reason not to treat two sizes in one line as a clean comparison.

Guides split on flavor: a bigger ring often means more of it, thin cigars tend to be more intense, or a larger ring doesn't mean fuller flavor. Tobacconist University's position is that no ring gauge is ideal for everyone, and that a cigar's construction, blend and shape matter along with your own preference.

Thicker also doesn't mean stronger. "There is no correlation between the size of a cigar and its strength," Cigar Aficionado wrote in a 2000 size guide. On our pages, strength means nicotine: the physical effect you feel. The strength per puff comes from the blend either way, and our guide to cigar strength, body and flavor shows how to read it.

If you're choosing a first size, Robusto vs. Toro covers that. Smoking times by size are in how long a cigar takes.

Frequently asked questions

What does "ring" mean in cigars?

It's the unit of width: one ring is 1/64 of an inch of diameter. "A 52 ring" and "a 52 ring gauge" mean the same thing.

What is the diameter of a 50 ring cigar?

50/64 of an inch, which reduces to 25/32. That's about 0.78 inch or 19.8 mm.

How big is a 52 ring gauge cigar?

52/64 of an inch across, or 13/16 of an inch, about 20.6 mm. Length is a separate number.

Sources

13 source links